| DTC Strategy |
|
- Poor Connector Connection
- Open in TPS Supply Circuit
- Short to Ground or Open in TPS2 Signal Circuit
- Faulty TPS2
|
| Enable Condition |
- Ignition Switch "ON"
- Engine operating state at idle (gas pedal value is less than 0.01%)
- TPS set point is lower than 61.078°
- TPS 1 and TPS 2 ratio failure is detected or TPS 1 failure is detected
|
| Threshold Value |
- TPS 2 voltage is lower than 0.1V
- TPS 2 voltage is lower than 2.0V at engine idle
- Short circuit to ground or open circuit
|
| Diagnostic Time |
|
| MIL ON Condition |
|