| Faulty engine startcurrent gear not indicated in the cluster warning lamp ON engine stall while stopped creeping not possible Auto parking release disabled |
Position switch circuit abnormal Position switch function abnormal |
Check the inspection FLOW and replace the position switch |
| Faulty position sensor "N" setting |
Use the "N" setting jig and adjust the "N" setting. (Refer to Dual Clutch Transmission Control System - "POSITION SWITCH ") |
| Shift cable separation faulty |
Adjust shift cable separation (Refer to Dual Clutch Transmission Control System - POSITION SWITCH
) |
| Position switch vehicle side circuit abnormal |
Check the connection of junction box power terminal, fuse (TCU) terminal and replace the junction box or adjust the gap |
| Check inside the position switch connector for foreign substance and whether terminal is bent |
| Poor ground condition on position switch wire |
Check the ground condition of wire and retighten it |
| Poor position unit (disconnection/short-circuit) |
Replace position switch (refer to
position switch inspection) |