LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2022 >> Palisade Calligraphy, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Force Solenoid (VFS) >> Repair Procedures >> Removal >> Variable Force Solenoid (VFS) [Bank 1/Intake]
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Variable Force Solenoid (VFS) [Bank 1/Intake]

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the VFS connector (A).
  3. Remove the mounting bolts (B), and then remove the VFS from the engine.

    Variable force solenoid mounting bolt: 

    9.8-11.8 N.m (1.0-1.2 kgf.m, 7.2-8.7 lb-ft)

    G14423898Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals