Transmission Control Module (TCM): Installation
- Install in the reverse order of removal.
- Perform the oil pressure characteristics input procedure using the diagnostic tool when replacing with a new TCM.NOTE:
- In order to avoid any problem including sense of starting delay of the transmission and shock at acceleration and vehicle start, make sure to process learning for TCM after replacing the TCM.
(Refer to IVT Control System - "ADJUSTMENT ")
- Since TCM and ECM are integrated, perform the procedures related in the ECM after replacing the TCM.
(Refer to Engine Control/Fuel System - Engine Control Module (ECM) - "ADJUSTMENT ")
- In order to avoid any problem including sense of starting delay of the transmission and shock at acceleration and vehicle start, make sure to process learning for TCM after replacing the TCM.