Set Operation

To activate the ASCD, all following conditions must exist.

• Ground is supplied to ASCD control unit terminal 9 (Main switch is in ON position.)
• Power is supplied to ASCD control unit terminal 8 (Brake pedal is released and A/T selector lever is in other than P and N position.)
• Vehicle speed is between 40 km/h (25 MPH) and 144 km/h (89 MPH). (Signal from combination meter)

When the SET/COAST switch is depressed, power is supplied:

• from ASCD steering switch terminal 3
• to ASCD control unit terminal 11.

And then ASCD pump is activated to control throttle wire and ASCD control unit supply ground

• to combination meter terminals 51 to illuminate SET indicator.