LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> FX35 RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0340 & P0345 CMP Sensor (Phase) >> DTC confirmation procedure >> Testing Condition
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Testing Condition

Before performing the following procedure, confirm that battery voltage is more than 10.5V with ignition switch ON  .

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select DATA MONITOR mode with CONSULT-II. See Figure.
  3. Crank engine for at least 2 seconds and run it for at least 5 seconds at idle speed.
  4. If 1st trip DTC is detected, Go to DIAGNOSTIC PROCEDURE .

    If 1st trip DTC is not detected, Go to next step.

  5. Maintaining engine speed at more than 800 RPM for at least 5 seconds.
  6. If 1st trip DTC is detected, Go to DIAGNOSTIC PROCEDURE .

With GST 

Follow the procedure with CONSULT-II above.

scientia non olet · About LEMON Manuals