LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2005 >> G35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 438 (Engine Control System - Introduction) >> On Board Diagnostic (OBD) System >> On Board Diagnostic System Function >> How To Switch Diagnostic Test Mode >> How to Erase Diagnostic Test Mode II (Self-diagnostic Results)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How to Erase Diagnostic Test Mode II (Self-diagnostic Results)

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set ECM in Diagnostic Test Mode II (Self-diagnostic results). Refer to "How to Set Diagnostic Test Mode II (Self-diagnostic Results) ".
  2. Fully depress the accelerator pedal and keep it for more than 10 seconds.

    The emission-related diagnostic information has been erased from the backup memory in the ECM.

  3. Fully release the accelerator pedal, and confirm the DTC 0000 is displayed.
scientia non olet · About LEMON Manuals