Terminals and Reference Value for Intelligent Key Unit

TERMINALS AND REFERENCE VALUE FOR INTELLIGENT KEY UNIT

Terminal	Wire Color	Item	Signal Input/Output	Condition			Voltage (V) Approx.
				Ignition Switch Position	Operation or Conditions
1	SB	Power source (Fuse)	Input	-	-		Battery voltage
2	GR	Door request switch (driver side)	Input	-	Press door request switch (driver side).		0
					Other than above		5
4	B/Y	Remote keyless entry receiver RSSI signal	Input/Output	LOCK	When Intelligent Key is in vehicle, press push-button ignition switch		0
					Other than above
5	B/W	Remote keyless entry receiver signal	Input/Output	LOCK	Waiting state
					Any operation using Intelligent Key
6	B	Remote keyless entry receiver ground	-	-	-		0
7	B/R	Remote keyless entry receiver power supply	Output	LOCK	-
11	LG	Outside key antenna (+) signal (passenger side)	Output	LOCK	Press door request switch (passenger side).
12	G	Outside key antenna (-) signal (passenger side)
13	LG/B	Key slot illumination signal	Output	LOCK	Insert Intelligent Key into key slot and driver side door is open.		Illuminate: Battery voltage Does not illuminate: 0
					Remove Intelligent Key from key slot.		0
17	O/B	Outside key antenna (+) signal (Trunk room)	Output	LOCK	Press trunk opener request switch.
18	L	Outside key antenna (-) signal (Trunk room)
19	BR/Y	Key switch signal	Input	LOCK	Insert Intelligent Key into key slot.		0
					Remove Intelligent Key from key slot.		Battery voltage
20	B	Ground	-	ON	-		0
22	O	Door request switch (passenger side)	Input	-	Press door request switch (passenger side).		0
					Other than above		5
23	B	Trunk lid opener cancel switch	Input	-	Trunk lid opener cancel switch is ON		0
					Trunk lid opener cancel switch is OFF (cancel)		5
24	O/L	Outside key antenna (+) signal (driver side)	Output	LOCK	Press door request switch (driver side).
25	Y	Outside key antenna (-) signal (driver side)
26	BR/W	Unlock sensor (driver side)	Input	-	Door (driver side) is locked.		Battery voltage
					Door (driver side) is unlocked.		0
27	V	P range switch	Input	-	Selector lever is in "P" position.		0
					Other than above		Battery voltage
30	L/W	Ignition switch (ACC)	Input	ACC	-		Battery voltage
31	GR	Ignition switch (ON)	Input	ON	-		Battery voltage
35	LG	Vehicle speed signal	Input	ON	At speedometer operation (vehicle speed approx. 40 km/h)
37	P	CAN-L	Input/Output	-	-		-
38	L	CAN-H	Input/Output	-	-		-
39	BR/W	Push-button ignition switch signal	Input	-	Press push-button ignition switch		0
					Other than above		Battery voltage
40	B	Ground	-	ON	-		0
41	Y	Power source (Fuse)	Input	-	-		Battery voltage
47	LG	Inside key antenna (+) signal (Instrument center)	Output	LOCK	Any door open → all door close
48	V	Inside key antenna (-) signal (Instrument center)
49	B	Inside key antenna (+) signal (Console)	Output	LOCK	Any door open → all door close
50	W	Inside key antenna (-) signal (Console)
51	R/L	Inside key antenna (+) signal (Rear seat)	Output	LOCK	Any door open → all door closed
52	R/W	Inside key antenna (-) signal (Rear seat)
53	G/W	Inside key antenna (+) signal (Trunk room)	Output	LOCK	Any door open → all door close
54	LG	Inside key antenna (-) signal (Trunk room)
55	P	Intelligent Key warning buzzer	Output	LOCK	Operate door request switch.	Buzzer OFF	Battery voltage
						Sound buzzer	0
56	B	Ground	-	ON	-		0
57	L	Power source (Fuse)	Input	-	-		Battery voltage
58	O	A/T device power supply	Output	LOCK	Wake-up state (Open drive side door)		Battery voltage
					Sleep state (After 30 seconds or more since all doors are closed under the condition that the ignition switch is in the LOCK position)		0
61	GR/R	Trunk opener request switch	Input	-	Press trunk opener request switch.		0
					Other than above		5
72	B	Ground	-	ON			0