LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> EX35 Journey, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1217 To P2A03 >> P1805 Brake Switch >> Component Inspection (Stop Lamp Switch)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection (Stop Lamp Switch)

  1. CHECK STOP LAMP SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect stop lamp switch harness connector.
    3. Check the continuity between stop lamp switch terminals under the following conditions.
      CONTINUITY SPECIFICATIONS

      Terminals Condition Continuity
      3 and 4 Brake pedal Fully released Not existed
      Slightly depressed Existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. CHECK STOP LAMP SWITCH-II
    1. Adjust stop lamp switch installation. Refer to "INSPECTION AND ADJUSTMENT ".
    2. Check the continuity between stop lamp switch terminals under the following conditions.
      CONTINUITY SPECIFICATIONS

      Terminals Condition Continuity
      3 and 4 Brake pedal Fully released Not existed
      Slightly depressed Existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace stop lamp switch.

scientia non olet · About LEMON Manuals