Self Diagnosis Result

In CONSULT-III self-diagnosis, self-diagnosis results and error history are displayed collectively.
The current malfunction indicates "CRNT". The past malfunction indicates "PAST".
The timing is displayed as "0" if any of the error codes [U1000], [U1010], [U1300] and [U1310] is detected.

The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.

Self-diagnosis detection range

Fig 1: Trouble Diagnosis Screen Display Of - Self-Diagnosis Detection Range

Courtesy of NISSAN MOTOR CO., U.S.A.

Self-diagnosis results display item

SELF-DIAGNOSIS RESULTS DISPLAY ITEM CHART

Error item	Description	Possible malfunction factor/Action to take
CAN COMM CIRCUIT [U1000]	CAN communication malfunction is detected.	Perform diagnosis with CONSULT-III, and then repair the malfunctioning parts according to the diagnosis results. refer to "DIAGNOSIS PROCEDURE ".
CONTROL UNIT (CAN) [U1010]	CAN initial diagnosis malfunction is detected.	Replace the AV control unit.
CONTROL UNIT (AV) [U1310]	AV communication circuit initial diagnosis malfunction is detected.
Control Unit FLASH-ROM [U1200]	AV control unit malfunction is detected.
CAN CONT [U1216]	AV control unit malfunction is detected.
FRONT DISP CONN [U1243]	Display unit power supply and ground circuit malfunction is detected. Malfunction is detected in communication circuit between AV control unit and display unit. Malfunction is detected in communication signal between AV control unit and display unit.	Display unit power supply and ground circuit. Communication circuit between AV control unit and display unit.
SAT CONN [U1255]	Satellite radio tuner power supply and ground circuit malfunction is detected. Malfunction is detected in communication circuit between AV control unit and satellite radio tuner. Malfunction is detected in communication signal between AV control unit and satellite radio tuner. Malfunction is detected in request signal circuit between AV control unit and satellite radio tuner.	Satellite radio tuner power supply and ground circuit. Communication circuit between AV control unit and satellite radio tuner. Request signal circuit between AV control unit and satellite radio tuner.
AV COMM CIRCUIT [U1300] SWITCH CONN [U1240]	Multifunction switch power supply and ground circuit malfunction is detected. Malfunction is detected in AV communication circuit between AV control unit and multifunction switch. Malfunction is detected in AV communication signal between AV control unit and multifunction switch.	Multifunction switch power supply and ground circuits. AV communication circuit between AV control unit and multifunction switch.