LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio, Visual & Navigation System >> Base Audio Without Navigation >> Function Diagnosis >> Audio System >> Component Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Description

COMPONENT DESCRIPTION CHART

Part name Description
AV CONTROL UNIT
  • The AM/FM receiving function and the CD playing function are equipped.
  • Outputs the audio signal from each function to each speaker.
DISPLAY UNIT
  • Display image is controlled by the serial communication from AV control unit.
  • RGB image signal (audio operation condition) is input from AV control unit.
FRONT DOOR SPEAKER
  • Outputs sound signal from AV control unit.
  • Outputs high, mid and low range sounds.
REAR DOOR SPEAKER
  • Outputs sound signal from AV control unit.
  • Outputs high, mid and low range sounds.
TWEETER
  • Outputs sound signal from AV control unit.
  • Outputs high range sound.
MULTIFUNCTION SWITCH
  • Each audio operation can be operated.
  • Connected with preset switch via cable, and operation signal is transmitted to AV control unit via AV communication.
PRESET SWITCH
  • Each audio and air conditioner operation can be operated.
  • Connected with multifunction switch via cable, and operation signal is transmitted to AV control unit via AV communication.
  • The CD ejection operating signal is performed by hardwire
STEERING SWITCH
  • Each audio operation can be operated.
  • Steering switch signal (operation signal) is output to AV control unit.
ANTENNA AMP.
  • Radio signal received by glass antenna is amplified and transmitted to AV control unit.
  • Power (antenna amp ON signal) is supplied from AV control unit.

DIAGNOSIS SYSTEM (AV CONTROL UNIT) 



PART NAME DESCRIPTION CHART

Part name Description
AV CONTROL UNIT
  • The AM/FM receiving function and the CD playing function are equipped.
  • BOSE amp. ON signal, sound signal and mode change signal transmitted to BOSE amp.
DISPLAY UNIT
  • Display image is controlled by the serial communication from AV control unit.
  • RGB image signal (audio operation condition) is input from AV control unit.
BOSE AMP. Inputs power (amp ON) and sound signal from AV control unit, and outputs sound signal to each speaker.
FRONT DOOR WOOFER
  • Outputs sound signal from BOSE amp.
  • Outputs low-pitched sound.
FRONT DOOR SQUAWKER
  • Outputs sound signal from BOSE amp.
  • Outputs midrange sound.
REAR DOOR SPEAKER
  • Outputs sound signal from BOSE amp.
  • Outputs high, mid and low range sounds.
TWEETER
  • Outputs sound signal from BOSE amp.
  • Outputs high range sound.
CENTER SPEAKER
  • Outputs sound signal from BOSE amp.
  • Outputs high, mid and low range sounds.
REAR WOOFER
  • Outputs sound signal from BOSE amp.
  • Outputs low-pitched sound.
  • Power (amp. ON signal) is supplied from BOSE amp.
MULTIFUNCTION SWITCH
  • Each audio operation can be operated.
  • Connected with AV control unit via cable, and operation signal is transmitted to AV control unit via AV communication.
PRESET SWITCH
  • Each audio operation can be operated.
  • It is connected to the multifunction switch by AV communication. The operation signal is transmitted to the AV control unit.
  • The CD ejection operating signal is performed by hardwire.
STEERING SWITCH
  • Each audio operation can be operated.
  • Steering switch signal (operation signal) is output to AV control unit.
ANTENNA AMP.
  • Radio signal received by glass antenna is amplified and transmitted to AV control unit.
  • Power (antenna amp ON signal) is supplied from AV control unit.
iPod ADAPTER
  • Inputs iPod sound signal from iPod®, and outputs iPod sound signal to AV control unit.
  • Receiving/transmitting of iPod© operation signals are performed as follows:
  • between AV control unit and iPod adapter: AV communication.
  • between iPod® and iPod adapter: serial communication.