DTC Confirmation Procedure

1. Turn the power supply position to ACC under the following conditions, and wait for at least 2 seconds.

   A/T models 

   • A/T selector lever is in the P or N position
   • Do not depress brake pedal

   M/T models 

   • Do not depress clutch pedal
2. Check "Self diagnostic result" with CONSULT-III.

Is DTC detected? 

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: GO TO 2.

1. Turn the power supply position ACC to OFF under the following conditions, and wait for at least 2 seconds.

   A/T models 

   • A/T selector lever is in the P or N position
   • Do not depress brake pedal

   M/T models 

   • Do not depress clutch pedal
2. Check "Self diagnostic result" with CONSULT-III.

Is DTC detected? 

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: GO TO 3.

Check if the customer uses to connect some electronic goods* to the Cigarette lighter socket.

*: Electronic goods: Personal computer, CD player...

Has electronic good been connected to Cigarette lighter socket? 

YES: DTC detection is possible.

NO: INSPECTION END