LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Power Control System) >> IPDM E/R >> Function Diagnosis >> Diagnosis System (IPDM E/R) >> CONSULT - III Function (IPDM E/R) >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Monitor item

MONITOR ITEM REFERENCE

Monitor Item [Unit] MAIN SIGNALS Description
MOTOR FAN REQ [1/2/3/4] x Displays the status of the cooling fan speed request signal received from ECM via CAN communication.
A/C COMP REQ [OFF/ON] x Displays the status of the A/C request signal received from AV control unit via CAN communication.
TAIL&CLR REQ [OFF/ON] x Displays the status of the position light request signal received from BCM via CAN communication.
HL LO REQ [OFF/ON] x Displays the status of the low beam request signal received from BCM via CAN communication.
HL HI REQ [OFF/ON] x Displays the status of the high beam request signal received from BCM via CAN communication.
FR FOG REQ(1) [OFF/ON] x Displays the status of the front fog lamp request signal received from BCM via CAN communication.
HL WASHER REQ [OFF/ON]  
NOTE: This item is displayed, but cannot be monitored.
FR WIP REQ [STOP/1LOW/LOW/HI] x Displays the status of the front wiper request signal received from BCM via CAN communication.
WIP AUTO STOP [STOP P/ACT P] x Displays the status of the front wiper auto stop signal judged by IPDM E/R.
WIP PROT [OFF/Block] x Displays the status of the front wiper fail-safe operation judged by IPDM E/R.
ST RLY REQ [OFF/ON]   Displays the status of the starter request signal received from ECM via CAN communication.
IGN RLY [OFF/ON] x Displays the status of the ignition relay judged by IPDM E/R.
RR DEF REQ(1) [OFF/ON] x Displays the status of the rear defogger request signal received from AV control unit via CAN communication.
OIL P SW [OPEN/CLOSE]   Displays the status of the oil pressure switch judged by IPDM E/R.
DTRL REQ [OFF]  
NOTE: This item is displayed, but cannot be monitored.
HOOD SW [OPEN/CLOSE]  
NOTE: This item is displayed, but cannot be monitored.
THFT HRN REQ [OFF/ON]   Displays the status of the theft warning horn request signal received from BCM via CAN communication.
HORN CHIRP [OFF/ON]   Displays the status of the horn reminder signal received from BCM via CAN communication.
(1) If equipped