Active Test Mode
Description
- 4WAS front actuator assembly activation is checked according to the control signal from CONSULT-III.
- 4WAS front lock solenoid valve (lock structure) is activated forcibly (ON/OFF) using each control signal of "LOCK OPERATION". Perform this mode when performing 4WAS front actuator adjustment.CAUTION: Never steer the steering wheel during "RELEASE".
- The steering angle sensor neutral point judgment (OK/NG) is performed using each control signal of "SLOW MODE".
ACTIVE TEST MODE
| Select test item | Control signal | Remarks |
|---|---|---|
| LOCK OPERATION | RELEASE | 4WAS front lock solenoid valve lock is released. |
| LOCK | 4WAS front lock solenoid valve lock is applied. | |
| SLOW MODE | MODE START | Steering angle sensor neutral point check starts. (Turn the steering wheel rightward and left-ward slowly. Steer until the turning stops.) |
| MODE END | Steering angle sensor neutral point check ends. |