LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> EX35 Base, AWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 59 (Engine Control System - Component Testing) >> Ignition Signal >> Component Inspection (Condenser)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Inspection (Condenser)

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDENSER
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as follows.
      RESISTANCE SPECIFICATIONS

      Terminals Resistance
      1 and 2 Above 1 MΩ [at 25°C (77°F)]

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace condenser.