LDP System Control Description
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
- LDP system is controlled by lane camera unit and LDP controller [ABS actuator and electric unit (control unit)].NOTE: LDP controller is integrated in the ABS actuator and electric unit (control unit).
- Lane camera unit monitors lane markers of the traveling lane. It transmits the detected lane condition signal to ABS actuator and electric unit (control unit) via CAN communication.
- ABS actuator and electric unit (control unit) detects vehicle conditions depending on each signal.
- When ABS actuator and electric unit (control unit) judges vehicle deviation from the traveling lane, it controls following actions.
- Requests warning to the lane camera unit via CAN communication. And then lane camera unit controls the lane departure warning lamp and the lane departure warning buzzer to alert the driver.
- Calculates the necessary yaw moment. And then it controls the brake pressure of each wheel individually to generate the intended movement.
LDP OPERATING CONDITION
- LDP ON indicator lamp: ONNOTE: LDW ON indicator is OFF.
- Vehicle speed: approximately 72 km/h (45 MPH) or more
NOTE:
For details of LDP system operating conditions, refer to NORMAL OPERATING CONDITION
.
CONDITION REFERENCE
| Input | Output | |||
|---|---|---|---|---|
| Vehicle speed (Approx.) [km/h (MPH)] | Vehicle condition/Driver's operation | Action | Indication on the combination meter | Buzzer |
| Less than 64 (40) | Close to lane marker | No action | - | |
| 72 (45) or more | Close to lane marker | Warning and yawing
|
Short continuous beeps | |
|
No action | - | ||
| Close to lane with soft braking | Warning
|
Short continuous beeps | ||
| VDC OFF switch: OFF ==> ON | Cancellation
NOTE:
When LDP ON switch is ON ==> OFF, indicator lamp is turned OFF.
|
Beep | ||
| SNOW MODE switch: OFF ==> ON (If equipped) | Cancellation
NOTE:
When LDP ON switch is ON ==> OFF, indicator lamp is turned OFF.
|
Beep | ||