LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Auto Cruise Control System) >> LDW & LDP >> Function Diagnosis >> Diagnosis System [Abs Actuator And Electric Unit (Control Unit)] >> Active Test Mode >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test Mode: Notes

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not perform active test while driving vehicle.
  • Make sure to completely bleed air from brake system.
  • The active test cannot be started when ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp are ON.
  • ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp are ON during active test.
  • Erase memory of ICC system after implementing active test. Refer to SELF-DIAGNOSTIC FUNCTION  .
  • Erase memory of the lane camera unit after implementing active test. Refer to CONSULT-III FUNCTION (LANE CAMERA)  .
NOTE:
  • When active test is performed while depressing the pedal, the pedal depression amount will change. This is normal. (Only solenoid valve and ABS motor.)
  • "TEST IS STOPPED" is displayed 10 seconds after start of operation.
  • After "TEST IS STOPPED" is displayed, perform test again.