Front Axle Hub Bolt: Replacement

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL 
2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH  (see REMOVAL  )
Fig 1: Disconnecting Front Disc Caliper
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. REMOVE FRONT DISC  (See DISASSEMBLY )
4. REMOVE FRONT AXLE LH HUB BOLT 
   1. Using SST and a screwdriver or equivalent to hold the axle hub, remove the front axle hub bolt.

      SST 09650 - 17011 

      NOTE: Do not damage the threads of the hub bolts.
   Fig 2: Removing Front Axle Hub Bolts Using SST

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. INSTALL FRONT AXLE LH HUB BOLT 
   1. Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.
      NOTE: Install hub nuts to prevent damage to the hub bolts.
   2. Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.
   3. Remove the washer and hub nut.
      NOTE: Do not damage the threads of the hub bolts.
6. INSTALL FRONT DISC  (See INSTALLATION )
7. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH  (see INSTALLATION  )
8. INSTALL FRONT WHEEL 

   Torque: for Aluminum Wheel 

   131 N*m (1336 kgf*cm, 97 ft.*lbf) 

   for Steel Wheel 

   209 N*m (2131 kgf*cm, 154 ft.*lbf)