Tire Pressure Sensor Registration: Notes
NOTE:
To register a new tire pressure sensor, a Nissan CONSULT-II and CONSULT-II CONVERTER (2004-07 models) or CONSULT-III (2008-10) must be used. A Transmitter Activation Tool (J-45295) or Signal Tech II Tool (J-50190) can aid in registration procedure.
NOTE:
If the CONSULT-II is used without the CONSULT-II CONVERTER, malfunction might be detected during self-diagnosis depending on control unit.
NOTE:
If tire pressure sensor was replaced, the new sensor will be in an "asleep" mode. To wake up sensor, see TRANSMITTER WAKE-UP OPERATION .