Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM INITIALIZATION
Perform initialization of BCM and registration of all Intelligent Keys using CONSULT-III.

For initialization and registration procedures, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.

Can the system be initialized and can the engine be started with registered Intelligent Key?

YES: INSPECTION END

NO: GO TO 2.
CHECK SELF DIAGNOSTIC RESULT
1. Select "Self Diagnostic Result" mode of "BCM" using CONSULT-III.
2. Erase DTC.
3. Perform DTC CONFIRMATION PROCEDURE for DTC B2192. Refer to , "DTC LOGIC ".
  Is DTC detected?
  
  YES: GO TO 3.
  
  NO: INSPECTION END
REPLACE BCM
1. Replace BCM. Refer to "REMOVAL AND INSTALLATION ".
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT-III.
  For initialization and registration procedures, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
  
  Can the system be initialized and can the engine be started with registered Intelligent Key?
  
  YES: INSPECTION END
  
  NO: GO TO 4.
REPLACE ECM
Replace ECM.

Refer to "REMOVAL AND INSTALLATION ".

INSPECTION END