LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 265 (Security Control System) >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B2603: Shift Position >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 1
    1. Shift the selector lever to the P position.
    2. Turn ignition switch ON and wait 1 second or more.
    3. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT-III.

      Is DTC detected? 

      YES: Go to , "DIAGNOSIS PROCEDURE ".

      NO: GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 2
    1. Shift the selector lever to any position other than P, and wait 1 second or more.
    2. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT-III.

      Is DTC detected? 

      YES: Go to , "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals