Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION START
1. Turn ignition switch ON.
2. Select "Self Diagnostic Result" mode of "BCM" using CONSULT-III.
3. Touch "ERASE".
4. Perform DTC CONFIRMATION PROCEDURE for DTC B26F8.
  Refer to , "DTC LOGIC ".
  
  Is DTC detected?
  
  YES: GO TO 2.
  
  NO: INSPECTION END
REPLACE BCM
1. Replace BCM. Refer to "REMOVAL AND INSTALLATION ".
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT-III.
  For initialization and registration procedures, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
  
  INSPECTION END