Work Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

PREPARATION BEFORE CALIBRATION PROCEDURE
1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. "TIRE AIR PRESSURE ".
GO TO 2.
PERFORM CALIBRATION

With CONSULT-III

Turn ignition switch ON.
CAUTION: Never start engine.
Select "Work Support" mode in "ENGINE".
Select "G SENSOR CALIBRATION".
Touch "Start".

CAUTION: Never swing the vehicle during "G sensor calibration".

Is "COMPLETED" displayed?

YES: END

NO: Perform steps 1 and 2 again.