CONSULT-III Function (ALL MODE AWD/4WD): Function

WARNING: This page is about a different variant/trim than selected.

CONSULT-III can display each diagnostic item using the diagnostic test modes shown in the following.

DIAGNOSTIC TEST MODES REFERENCE CHART

Diagnostic test mode	Function
Self-diagnostic results	Self-diagnostic results can be read and erased quickly.
Data monitor	Input/Output data in the AWD control unit can be read.
Active test	Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the AWD control unit and also shifts some parameters in a specified range.
ECU part number	AWD control unit part number can be read.