October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Fuel Pump Control Module
Courtesy of NISSAN MOTOR CO., U.S.A.
- Start engine and warm it up to normal operating temperature.
- Turn ignition switch OFF and wait at least 10 seconds.
- Check voltage between FPCM terminal 4 and ground under the following conditions.
VOLTAGE CONNECTOR TERMINALS REFERENCE CHART
| Condition |
Voltage |
| When engine cranking |
Approx. 0 V |
| After starting engine |
Approx. 5 V |
- If NG, replace fuel pump control module.
Courtesy of NISSAN MOTOR CO., U.S.A.