Active Test
CAUTION:
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the BSW warning lamp is illuminated.
- Shift the selector lever to "P" position, and then perform the test.
TEST ITEM DESCRIPTION
| Test item | Description |
|---|---|
| ICC BUZZER | Sounds a buzzer used for BSW system by arbitrarily operating ON/OFF |
| BSW/BSI WARNING LAMP | The BSW warning lamp can be illuminated by ON/OFF operations as necessary |
ICC BUZZER
TEST ITEM DESCRIPTION
| Test item | Operation | Description | BSW warning chime operation sound |
|---|---|---|---|
| ICC BUZZER | MODE1 | Transmits the buzzer output signals to the combination meter via CAN communication | Intermittent beep sound |
| Test start | Starts the tests of "MODE1" | - | |
| Reset | Stops transmitting the buzzer output signal below to end the test | - | |
| End | Returns to the "SELECT TEST ITEM" screen | - |
BSW/BSI WARNING LAMP
TEST ITEM DESCRIPTION
| Test item | Operation | Description | BSW warning lamp |
|---|---|---|---|
| BSW/BSI WARNING LAMP | Off | Stops transmitting the BSW warning lamp signal below to end the test | - |
| On | Transmits the BSW warning lamp signal to the combination meter via CAN communication | ON |