CONFIGURATION (AV CONTROL UNIT) : Work Procedure

NOTE: If "WRITE CONFIGURATION" is unsuccessful, perform "Accessory Number Initialization". For details, refer to "ON BOARD DIAGNOSIS FUNCTION ".

After performing "Accessory Number Initialization", reboot the AV control unit to perform "WRITE CONFIGURATION".

WRITING MODE SELECTION
CONSULT-III Configuration

Select "CONFIGURATION" of "MULTI AV".

When writing saved data: GO TO 2.

When writing manually: GO TO 3.
PERFORM "WRITE CONFIGURATION-CONFIG FILE"
CONSULT-III Configuration

Perform "WRITE CONFIGURATION-Config file".

WORK END
PERFORM "WRITE CONFIGURATION-MANUAL SELECTION"
CONSULT-III Configuration

Select "WRITE CONFIGURATION-Manual selection" to write vehicle specifications into the AV control unit.

For data to write, refer to "CONFIGURATION (AV CONTROL UNIT) : CONFIGURATION LIST ".

GO TO 4.
OPERATION CHECK
Check that the operation of the AV control unit is normal.

WORK END