Physical Values

TERMINALS REFERENCE

Terminal (Wire color)

Description

Condition

Reference value (Approx.)

Signal name

Input/Output

2 (BR)

3 (R)

Sound signal front LH

Output

Ignition switch ON

Sound output.

4 (LG)

5 (L)

Sound signal rear door speaker LH

Output

Ignition switch ON

Sound output.

6 (P)

15 (B)

Steering switch signal A

Input

Ignition switch ON

Keep pressing SOURCE switch.

0 V

Keep pressing MENU UP switch.

0.7 V

Keep pressing MENU DOWN switch.

1.3 V

Keep pressing HANDSFREE switch

2.0 V

Except for above.

3.3 V

7 (V)

Ground

ACC power supply

Input

Ignition switch ACC

Battery voltage

9 (R)

Ground

Illumination signal

Input

Ignition switch OFF

Lighting switch is OFF.

0 V

Lighting switch is ON.

12.0 V

11 (L)

12 (W)

Sound signal front RH

Output

Ignition switch ON

Sound output.

13 (L)

14 (P)

Sound signal rear door speaker RH

Output

Ignition switch ON

Sound output.

16 (L)

15 (B)

Steering switch signal B

Input

Ignition switch ON

Keep pressing VOL DOWN switch.

0 V

Keep pressing VOL UP switch.

0.7 V

Keep pressing PHONE switch.

1.3 V

Except for above.

3.3 V

19 (Y)

Ground

Battery power supply

Input

Ignition switch OFF

Battery voltage

20 (B)

Ground

Ignition switch ON

0 V

36 (O)

Ground

Signal VCC

Output

Ignition switch ACC

8.8 V

37 (LG)

Ground

Signal ground

Ignition switch OFF

0 V

38 (R)

Ground

Horizontal synchronizing (HP) signal

Input

Ignition switch ON

39 (BR)

Ground

Communication signal (DISP→CONT)

Input

Ignition switch ON

When adjusting display brightness.

40 (B)

Ground

RGB area (YS) signal

Output

Ignition switch ON

At RGB image is displayed.

5.0 V

At camera image is displayed.

Shield

42 (W)

Ground

RGB synchronizing signal

Output

Ignition switch ON

43 (G)

Ground

RGB signal (R: red)

Output

Ignition switch ON

Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen.

44 (L)

Ground

RGB signal (G: green)

Output

Ignition switch ON

Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen.

45 (P)

Ground

RGB signal (B: blue)

Output

Ignition switch ON

Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen.

46 (V)

Ground

Composite image signal ground

Ignition switch ON

0 V

47 (SB)

Ground

Composite image signal

Output

Ignition switch ON

At camera image is displayed.

48 (Y)

Ground

Inverter VCC

Output

Ignition switch ACC

8.8 V

49 (BR)

Ground

Inverter ground

Ignition switch OFF

0 V

50 (G)

Ground

Vertical synchronizing (VP) signal

Input

Ignition switch ON

51 (Y)

Ground

Communication signal (CONT→DISP)

Output

Ignition switch ON

When adjusting display brightness.

Shield

62 (B)

Ground

Camera image signal

Input

Ignition switch ON

At camera image is displayed.

Shield

72 (W)

Ground

Camera ground

Ignition switch ON

0 V

73 (R)

Ground

Camera power supply

Output

Ignition switch ON

At rear view camera image is displayed.

6.0 V

Except for above.

0 V

76 (P)⁽¹⁾ (B)⁽²⁾

AV communication signal (L)

Input/Output

77 (L)⁽¹⁾ (G)⁽²⁾

AV communication signal (H)

Input/Output

78 (B)

AV communication signal (L)

Input/Output

79 (G)

AV communication signal (H)

Input/Output

80 (P)

CAN-L

Input/Output

81 (L)

CAN-H

Input/Output

82 (B)

Ground

Switch ground

Ignition switch ON

0 V

Shield

87 (L)

88 (P)

TEL voice signal

Input

Ignition switch ON

During voice guide output with the HANDSFREE switch pressed.

92 (R)

Ground

Vehicle speed signal (8-pulse)

Input

Ignition switch ON

When vehicle speed is approx. 40 km/h (25 MPH)

NOTE: Maximum voltage may be 12.0 V due to specifications (connected units).

93 (V)

Ground

Parking brake signal

Input

Ignition switch ON

Parking brake is ON.

4.5 V

Parking brake is OFF.

0 V

94 (O)

Ground

Reverse signal

Input

Ignition switch ON

Shift the selector lever to R position.

12.0 V

Shift the selector lever other than R position.

0 V

95 (G)

Ground

Ignition signal

Input

Ignition switch ON

Battery voltage

96 (Y)

Ground

Disk eject signal

Input

Ignition switch ON

Pressing the eject switch.

0 V

Except for above.

5.0 V

120 (B)

124 (W)

Satellite radio sound signal LH

Input

Ignition switch ON

When satellite radio mode is selected.

121 (G)

125 (R)

Satellite radio sound signal RH

Input

Ignition switch ON

When satellite radio mode is selected

122 (B)

Ground

Communication signal (CONT→SAT)

Output

Ignition switch ON

When satellite radio mode is selected.

126

Shield

127

Shield

129 (W)

Ground

Request signal (SAT→CONT)

Input

Ignition switch ON

When satellite radio mode is selected.

130 (R)

Ground

Communication signal (SAT→CONT)

Input

Ignition switch ON

When satellite radio mode is selected.

132 (G)

USB ground

133 (R)

USB D- signal

134 (W)

V BUS signal

135 (L)

USB D+ signal

136

Shield

137

FM sub

Input

138

AM-FM main

Input

139

Ground

Antenna amp. ON signal

Input

Ignition switch ON

12.0 V

⁽¹⁾	Models with hands-free phone system.

⁽²⁾	Models without hands-free phone system.