Component Function Check

CONSULT-III DATA MONITOR

1. Select "WIPER" of BCM data monitor item.
2. Operate the rear wiper.
3. Check that "RR WIPER STOP" changes to "ON" and "OFF" linked with the wiper operation.
   MONITOR ITEM CONDITION
   
   

   Monitor item	Condition		Monitor status
   RR WIPER STOP	Rear wiper motor	Stop position	Off
   		Except stop position	On

   Is the status of item normal? 

   YES: Rear wiper auto stop signal circuit is normal.

   NO: Refer to "DIAGNOSIS PROCEDURE ".