LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio, Visual & Navigation System (With Navigation - Single Monitor) -- FX35/FX50 >> DTC/Circuit Diagnosis >> Camera Image Signal Circuit (Around View Monitor Control Unit To Display Unit) >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect front display unit connector and around view monitor control unit connector.
    3. Check continuity between front display unit harness connector and around view monitor control unit harness connector.
      CONTINUITY REFERENCE CHART

      Front display unit Around view monitor control unit Continuity
      Connector Terminal Connector Terminal
      M195 8 B46 27 Existed
    4. Check continuity between front display unit harness connector and ground.
      CONTINUITY REFERENCE CHART

      Front display unit Ground Continuity
      Connector Terminal
      M195 8 Not existed

      Is inspection result normal? 

      YES: GO TO 2.

      NO: Repair harness or connector.

  2. CHECK CAMERA IMAGE SIGNAL
    1. Connect front display unit connector and around view monitor control unit connector.
    2. Turn ignition switch ON.
    3. Check signal between front display unit harness connector and ground.
      SIGNAL REFERENCE CHART

      (+) (-) Condition Reference value
      Front display unit
      Connector Terminal
      M195 8 Ground At camera image is displayed.
      G04890020

      Is inspection result normal? 

      YES: Replace front display unit. Refer to "EXPLODED VIEW ".

      NO: Replace around view monitor control unit. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals