LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Control System (VQ35HR) - FX35 - System & Component Checks, Ecu & Symptom Diagnosis, Precautions & Preparations, Periodic Maintenance, Service Data And Specifications (SDS) >> ICC Brake Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK ICC BRAKE SWITCH FUNCTION

    With CONSULT-III 

    1. Turn ignition switch ON.
    2. Select "BRAKE SW1" in "DATA MONITOR" mode with CONSULT-III.
    3. Check "BRAKE SW1" indication under the following conditions.
    MONITOR ITEM CONDITION CHART

    Monitor item Condition Indication
    BRAKE SW1
    (ICC brake switch)    		 Brake pedal Slightly depressed OFF
    Fully released ON

    Without CONSULT-III 

    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector terminals as follows.
    TERMINAL VOLTAGE REFERENCE CHART

    ECM Condition Voltage (V)
    Connector + -
    Terminal Terminal
    M107 126 (ICC brake switch signal) 128 Brake pedal Slightly depressed Approx. 0
    Fully released Battery voltage

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals