LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> Steering >> Manual Steering >> Steering Control System - With Rear Active Steer -- FX35/FX50 >> System Description >> Diagnosis System (RAS Control Unit) >> CONSULT-III Function >> Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor Mode

Display Item List

DISPLAY ITEM LIST

Monitor item (Unit) Remarks
VHCL SPEED SE [km/h] or [mph] The vehicle speed signal from ABS actuator and electric unit (control unit) is indicated via CAN communication line.
STEERING ANG [°] The steering angle sensor signal from the steering angle sensor is indicated via CAN communication line.
ENGINE SPEED [RPM] The engine speed signal from ECM is indicated via CAN communication line.
POWER STR SOL [A] The current value of the power steering solenoid valve is indicated.
RR ST ANG-MAI [V] The voltage of the rear wheel steering angle sensor (main) is indicated.
RR ST ANG-SUB [V] The voltage of the rear wheel steering angle sensor (sub) is indicated.
RR ST ANG-VOL [V] The power supply voltage of the rear wheel steering angle sensor is indicated.
C/U VOLTAGE [V] The power supply voltage value of RAS control unit is indicated.
MOTOR VOLTAGE [V] The voltage value of RAS motor is indicated.
MOTOR CURRENT [A] The current value of RAS motor is indicated.
MTR CRNT OPE [A] The current value input to RAS motor is indicated.
RR ANGLE OPE [°] The angle command value is indicated for activating RAS motor.
STOP LAMP SW [On/Off] The stop lamp switch status is indicated.
HICAS RELAY [On/Off] RAS motor relay condition is indicated.
FAIL-SAFE [On/Off] The fail-safe mode status of RAS control unit is indicated.
WARNING LAMP [On/Off] RAS warning lamp ON/OFF condition is indicated.
scientia non olet · About LEMON Manuals