Diagnosis Procedure
- CHECK CONTINUITY COMPOSITE IMAGE SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect AV control unit connector and front display unit connector.
- Check continuity between AV control unit harness connector and front display unit harness connector.TERMINAL CONTINUITY REFERENCE CHART
AV control unit Front display unit Continuity Connector Terminal Connector Terminal M210 68 M195 18 Existed - Check continuity between AV control unit harness connector and ground.TERMINAL CONTINUITY REFERENCE CHART
AV control unit Ground Continuity Connector Terminal M210 68 Not existed Is the inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK AUX COMPOSITE SIGNAL
- Connect AV control unit connector and front display unit connector.
- Turn ignition switch ON.
- Check signal between auxiliary input jacks harness connector and ground.CONNECTOR TERMINAL REFERENCE CHART
(+) (-) Condition Reference value AV control unit Connector Terminal M210 68 Ground At DVD image is displayed. Is the inspection result normal?
YES: Replace front display unit. Refer to "EXPLODED VIEW ".
NO: Replace AV control unit. Refer to "EXPLODED VIEW ".