A/T MODELS : Diagnosis Procedure
- CHECK DTC WITH TCM
Check DTC with TCM. Refer to "CONSULT-III FUNCTION (TRANSMISSION) ".
Is the inspection result normal?
YES: Go to 2.
NO: Perform trouble shooting relevant to DTC indicated.
- CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Check DTC with ABS actuator and electric unit (control unit). Refer to "CONSULT-III FUNCTION ".
Is the inspection result normal?
YES: Go to 3.
NO: Perform trouble shooting relevant to DTC indicated.
- CHECK DTC WITH COMBINATION METER
Check DTC with combination meter. Refer to "CONSULT-III FUNCTION (METER/M&A) ".
Is the inspection result normal?
YES: Go to 4.
NO: Perform trouble shooting relevant to DTC indicated.
- CHECK OUTPUT SPEED SENSOR
Check output speed sensor. Refer to "DTC LOGIC ".
Is the inspection result normal?
YES: Go to 5.
NO: Replace or replace error-detected parts.
- CHECK WHEEL SENSOR
Check wheel sensor. Refer to "FRONT WHEEL SENSOR : REMOVAL AND INSTALLATION " (FRONT WHEEL SENSOR) or "REAR WHEEL SENSOR : REMOVAL AND INSTALLATION " (REAR WHEEL SENSOR).
Is the inspection result normal?
YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".
NO: Replace or replace error-detected parts.