LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - G37 Convertible - DTC P1233 Through P2A03 >> DTC P1572: ASCD Brake Switch >> Component Inspection (Stop Lamp Switch)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (Stop Lamp Switch)

  1. CHECK STOP LAMP SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect stop lamp switch harness connector.
    3. Check the continuity between stop lamp switch terminals under the following conditions.
      CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      3 and 4 Brake pedal Fully released Not existed
      Slightly depressed Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to 2.

  2. CHECK STOP LAMP SWITCH-II
    1. Adjust stop lamp switch installation. Refer to "Inspection and Adjustment ".
    2. Check the continuity between stop lamp switch terminals under the following conditions.
      CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      3 and 4 Brake pedal Fully released Not existed
      Slightly depressed Existed
scientia non olet · About LEMON Manuals