DTC Confirmation Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56 and 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" is previously conducted, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

GO TO 2.
CHECK DTC DETECTION

With CONSULT-III

Start the engine.
Run engine for at least 2 consecutive seconds at idle speed.
Perform "Self Diagnostic Results" in "E-SUS".

Is "U1010" detected?

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END