Lubricant Adjusting Procedure for Components Replacement Except Compressor
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
Fill with lubricant for the amount that is calculated according to the following conditions.
Example: Lubricant amount to be added when replacing evaporator and liquid tank [m l (Imp fl oz.)] = 35 (1.2) + 20 (0.7) + 5 (0.2) + α
LUBRICANT CONDITION
| Conditions | Lubricant amount to be added to A/C system m l (Imp fl oz.) | |
|---|---|---|
| Replace evaporator | A/C unit | 75 (2.6) |
| Rear A/C unit | 75 (2.6) | |
| Replace condenser | 75 (2.6) | |
| Replace liquid tank | 5 (0.2) | |
| Refrigerant leakage is detected | Large amount leakage | 30 (1.1) |
| Small amount leakage | - | |
| Lubricant amount that is recycled together with refrigerant during recycle operation | α | |