Data Monitor
ALL SIGNALS
- Displays the status of the following vehicle signals inputted into the AV control unit.
- For each signal, actual signal can be compared with the condition recognized on the system.DATA MONITOR DISPLAY ITEMS REFERENCE CHART
Display Item Display Vehicle status Remarks VHCL SPD SIG On Vehicle speed > 0 km/h (0 MPH) Changes in indication may be delayed. This is normal. Off Vehicle speed = 0 km/h (0 MPH) PKB SIG On Parking brake is applied. Off Parking brake is released. ILLUM SIG On Block the light beam from the auto light optical sensor when the light switch is ON. - Off Either of the following conditions - Lighting switch OFF
- Expose the auto light optical sensor to light when the light switch is ON.
IGN SIG On Ignition switch ON Off Ignition switch in ACC position REV SIG On Selector lever in R position Changes in indication may be delayed. This is normal. Off Selector lever in any position other than R SIDE VIEW SW Off - This item is displayed, but cannot be monitored. ROOM LAMP Off - This item is displayed, but cannot be monitored.
SELECTION FROM MENU
Allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.
ITEMS DESCRIPTION CHART
| Item to be selected | Description |
|---|---|
| VHCL SPD SIG | The same as when "ALL SIGNALS" is selected. |
| PKB SIG | |
| ILLUM SIG | |
| IGN SIG | |
| REV SIG | |
| SIDE VIEW SW | |
| ROOM LAMP |