Can Diagnostic Support Monitor

• The communication condition from 4WAS front control unit to 4WAS main control unit and malfunction counter are displayed.
• Error counter displays OK if any malfunction is not detected in the past. If the malfunction is detected, it displays 0. The upper limit of the counters is 39.
  ITEMS REFERENCE CHART
  
  

  Item	PRSNT	PAST
  TRANSMIT DIAG	OK / UNKWN	OK / 0 - 39
  4WAS(MAIN)	OK / UNKWN	OK / 0 - 39

DISPLAYED RESULT (PRSNT)

• OK : It is normal.
• UNKWN : CONSULT-III cannot receive (transmit) the data transmitted (received) by the diagnosed unit normally.

DISPLAYED RESULT (PAST)

• OK : It is normal.
• When "0" is displayed : It indicates that the system is presently malfunctioning.
• When except "0" is displayed : It indicates that system malfunction in the past is detected, but the system is presently normal.
  NOTE: Each time when ignition switch is turned OFF to ON, numerical number increases in 1→2→3...38→39.
  When the operation number of times exceeds 39, the number do not increase and "39" is displayed until self-diagnosis is erased.