Data Monitor
DISPLAY ITEM LIST
| x: Applicable ↓ : Optional item | |||
|---|---|---|---|
| Monitor item (Unit) | SELECT MONITOR ITEM | Remarks | |
| ECU INPUT SIGNALS | MAIN SIGNALS | ||
| FR LH SENSOR [km/h (MPH)] |
x | x | Wheel speed |
| FR RH SENSOR [km/h (MPH)] |
x | x | |
| RR LH SENSOR [km/h (MPH)] |
x | x | |
| RR RH SENSOR [km/h (MPH)] |
x | x | |
| STOP LAMP SW (On/Off) |
x | x | Stop lamp switch signal status |
| BATTERY VOLT (V) |
x | x | Battery voltage supplied to the ABS actuator and electric unit (control unit) |
| GEAR | x | x | Gear position determined by TCM |
| SLCT LVR POSI | x | x | A/T selector lever position |
| YAW RATE SEN (d/s) |
x | x | Yaw rate detected by yaw rate/side G sensor |
| ACCEL POS SIG (%) |
x | ↓ | Throttle actuator opening/closing is displayed (Linked with accelerator pedal) |
| SIDE G-SENSOR (m/s2 ) |
x | ↓ | Transverse G detected by yaw rate/side G sensor |
| STR ANGLE SIG (°) |
x | ↓ | Steering angle detected by steering angle sensor |
| PRESS SENSOR (bar) |
x | ↓ | Brake fluid pressure detected by pressure sensor |
| ENGINE RPM [tr/min (RPM)] |
x | ↓ | Engine speed |
| FLUID LEV SW (On/Off) |
x | ↓ | Brake fluid level switch signal status |
| PARK BRAKE SW (On/Off) |
x | ↓ | Parking brake switch signal status |
| LDP) APP SEN (%) ((2)) |
x | x | Accelerator pedal position sensor status received from ECM via CAN communication |
| FR RH IN SOL (On/Off) ((1)) |
↓ | x | Operation status of each solenoid valve |
| FR RH OUT SOL (On/Off) ((1)) |
↓ | x | |
| FR LH IN SOL (On/Off) ((1)) |
↓ | x | |
| FR LH OUT SOL (On/Off) ((1)) |
↓ | x | |
| RR RH IN SOL (On/Off) ((1)) |
↓ | x | |
| RR RH OUT SOL (On/Off) ((1)) |
↓ | x | |
| RR LH IN SOL (On/Off) ((1)) |
↓ | x | |
| RR LH OUT SOL (On/Off) ((1)) |
↓ | x | |
| MOTOR RELAY (On/Off) |
↓ | x | Motor and motor relay operation |
| ACTUATOR RLY (On/Off) (Note 1) |
↓ | x | Actuator relay operation |
| ABS WARN LAMP (On/Off) |
↓ | x | ABS warning lamp |
| OFF LAMP (On/Off) |
↓ | x | VDC OFF indicator lamp |
| SLIP/VDC LAMP (On/Off) |
↓ | x | VDC warning lamp |
| EBD SIGNAL (On/Off) |
↓ | ↓ | EBD operation |
| ABS SIGNAL (On/Off) |
↓ | ↓ | ABS operation |
| TCS SIGNAL (On/Off) |
↓ | ↓ | TCS operation |
| VDC SIGNAL (On/Off) |
↓ | ↓ | VDC operation |
| EBD FAIL SIG (On/Off) |
↓ | ↓ | EBD fail-safe signal |
| ABS FAIL SIG (On/Off) |
↓ | ↓ | ABS fail-safe signal |
| TCS FAIL SIG (On/Off) |
↓ | ↓ | TCS fail-safe signal |
| VDC FAIL SIG (On/Off) |
↓ | ↓ | VDC fail-safe signal |
| CRANKING SIG (On/Off) |
↓ | ↓ | Crank operation |
| USV[FR-RL] (On/Off) ((1)) |
↓ | ↓ | VDC switch-over valve |
| USV[FL-RR] (On/Off) ((1)) |
↓ | ↓ | |
| HSV[FR-RL] (On/Off) ((1)) |
↓ | ↓ | |
| HSV[FL-RR] (On/Off) ((1)) |
↓ | ↓ | |
| V/R OUTPUT (On/Off) |
↓ | ↓ | Solenoid valve relay activated |
| M/R OUTPUT (On/Off) |
↓ | ↓ | Actuator motor and motor relay activated |
| LDP) APP SEN (%) ((2)) |
x | x | Accelerator pedal position sensor status received from ECM via CAN communication |
| LDP) ICC MAIN SW (On/Off) ((2)) |
x | x | ICC MAIN switch status received from ECM via CAN communication |
| LDP) LDP ON SW (On/Off) ((2)) |
x | x | Dynamic driver assistance switch status received from ECM via CAN communication |
| LDP) WIPER SIGNAL (Stop/PRTCT/1low/1high/Low/High) ((2)) |
x | x | Front wiper operating condition received from BCM via CAN communication |
| LDP) BRAKE SW (On/Off) ((2)) |
x | x | Brake switch signal status |
| LDP) STOP LMP SW (On/Off) ((2)) |
x | x | Stop lamp switch signal status |
| LDP) LDW SW (On/Off) ((2)) |
x | x | Warning systems switch status received from lane camera unit via CAN communication |
| LDP) SHIFT POSITION (OFF/P/R/N/D/MM 1st - MM 5th) ((2)) |
x | x | Shift position received from TCM via CAN communication |
| LDP) TURN SIGNAL (Off/LH/RH/LH&RH) ((2)) |
x | x | Turn signal operating condition received from BCM via CAN communication |