Component Function Check
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "RECLN SW-FR", "RECLN SW-RR" in "Data monitor" mode with CONSULT-III.
- Check reclining switch signal under the following conditions.MONITOR ITEM CONDITION CHART
Monitor item Condition Status RECLINE SW-FR Reclining switch (forward) Operate ON Release OFF RECLINE SW-RR Reclining switch (backward) Operate ON Release OFF
Is the indication normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".