Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect front display unit connector and around view monitor control unit connector.
3. Check continuity between front display unit harness connector and around view monitor control unit harness connector.

   Front display unit		Around view monitor control unit		Continuity
   Connector	Terminal	Connector	Terminal
   M195	8	B46	27	Existed

4. Check continuity between front display unit harness connector and ground.

Is inspection result normal? 

YES: GO TO 2.

NO: Repair harness or connector.

1. Connect front display unit connector and around view monitor control unit connector.
2. Turn ignition switch ON.
3. Check signal between front display unit harness connector and ground.

(+)		(-)	Condition	Reference value
Front display unit
Connector	Terminal
M195	8	Ground	At camera image is displayed.	Courtesy of NISSAN NORTH AMERICA, INC.

Is inspection result normal? 

YES: Replace front display unit. Refer to "EXPLODED VIEW ".

NO: Replace around view monitor control unit. Refer to "EXPLODED VIEW ".