On Board Diagnosis Function: Notes

The diagnosis function of around view monitor control unit is displayed when selecting "Camera Cont." of Confirmation/Adjustment mode in the multi AV system.

AROUND VIEW MONITOR CONTROL UNIT DIAGNOSIS ITEM LIST

AV control unit Confirmation/Adjustment mode			Function
Camera Cont.	Connection Confirmation		The status of signals input to around view monitor control unit can be checked.
	Calibrating Camera Image	Rear Camera	Performs the calibration of rear camera.
		Pass-Side Camera	Performs the calibration of side camera RH.
		Front Camera	Performs the calibration of front camera.
		Dr-Side Camera	Performs the calibration of side camera LH.
		Initialize Camera Image Calibration*	The calibration can be initialized to NISSAN factory shipment condition.
	Fine Tuning of Birds-Eye View		The confirmation and adjustment of the difference between each camera can be performed. The system changes to the ZOOM function by the operation of shift and the ZOOM ratio of each camera can be changed.
	Correct Draw Line of Wide View	Rear-Wide View	The position of rear wide view guideline can be changed.

CAUTION: *: Never perform other operations for approximately 10 seconds after performing "Initialize Camera Image Calibration".