Fail-Safe Function
Front Wiper control
IPDM E/R performs the fail-safe function when the front wiper stop position circuit is malfunctioning. Refer to "FAIL-SAFE ".
Rain Sensor Malfunction
- BCM judges the rain sensor serial link error by the rain sensor serial link condition and detects the rain sensor malfunction by rain sensor malfunction signal.
- When BCM detects the rain sensor serial link error or the rain sensor malfunction while front wiper AUTO is operating, BCM operates a fail-safe control.
NOTE:
If rain sensor malfunction is detected when ignition switch is turned OFF ==> ON and front wiper switch is in the INT position, BCM operates front wiper LO.