Active Test Mode: Notes

CAUTION:

Never perform active test while driving vehicle.
Make sure to completely bleed air from brake system.
The active test cannot be started when ABS warning lamp, VDC warning lamp and brake warning lamp are ON.
ABS warning lamp, VDC warning lamp and brake warning lamp are ON during active test.
Erase memory of "ICC/ADAS" with CONSULT, after implementing active test.

NOTE:

When active test is performed while depressing the pedal, the pedal depression amount will change. This is normal. (Only solenoid valve and ABS motor.)
"TEST IS STOPPED" is displayed 10 seconds after operation start.
After "TEST IS STOPPED" is displayed, to perform test again.