LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G25 Base >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Steering Control System (Sedan) >> Ecu Diagnosis Information >> Power Steering Control Unit >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

Terminal No. Wire color Description Condition Value (Approx.)
+ - Signal name Input/Output
1 Ground LG Power steering solenoid valve voltage Output Vehicle speed: 0 km/h (0 MPH) (Engine is running) 4.4 - 6.6 V
Vehicle speed: 100 km/h (62 MPH) 2.4 - 3.6 V
3 Ground G Ignition switch power supply Input Ignition switch: ON Battery voltage
Ignition switch: OFF 0 V
5 Ground B Power steering solenoid valve ground - Always 0 V
6 Ground B Ground - Always 0 V
8 Ground SB Vehicle speed signal Input Vehicle speed: 40 km/h (25 MPH)
CAUTION: Check air pressure of tire under standard condition.
G05208060Courtesy of NISSAN NORTH AMERICA, INC.
10 Ground R Engine speed signal Input Engine speed: At idle (Warm-up condition)
G04876941Courtesy of NISSAN NORTH AMERICA, INC.
Engine speed: Approx. 2, 000 rpm (Warm-up condition)
G08458153Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION: When using circuit tester or oscilloscope to measure voltage for inspection, be sure not to forcibly extend any connector terminals.