LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G25 x >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> Fuel Injector >> Component Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

  1. CHECK FUEL INJECTOR
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as follows.
      Terminals Resistance
      1 and 2 11.1 - 14.5 Ω [at 10 - 60°C (60 - 140°F)]
      Fig 1: Checking Resistance Between Fuel Injector Connector Terminals 1 And 2
      G08451655Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals