| Driver seat control unit |
- Main units of automatic drive positioner system.
- It is connected to the CAN.
- It communicates with the automatic drive positioner control unit via UART communication.
|
| Automatic drive positioner control unit |
- It communicates with the driver seat control unit via UART communication.
- Perform various controls with the instructions of driver seat control unit.
- Perform the controls of the tilt & telescopic, door mirror and the seat memory switch.
|
| BCM |
Transmit the following status to the driver seat control unit via CAN communication.
- Driver door: OPEN/CLOSE
- Ignition switch position: ACC/ON
- Door lock: UNLOCK (with Intelligent Key or driver side door request switch operation)
- Key ID
- Key switch: Insert/Pull out Intelligent Key
- Starter: CRANKING/OTHER
|
| Unified meter and A/C amp. |
Transmit the vehicle speed signal to the driver seat control unit via CAN communication. |
| TCM |
Transmit the shift position signal (P range) to the driver seat control unit via CAN communication. |