LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Drive Positioner (Coupe)) >> DTC/Circuit Diagnosis >> Lifting Sensor (Rear) >> Component Function Check
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "LIFT RR PULSE" in the "Data monitor" mode using CONSULT.
    3. Check lifting sensor (rear) signal under the following conditions.
      Monitor item Condition Value
      LIFT RR PULSE Seat lifting (rear) Operate (Up) Change (increase)(1)
      Operate (Down) Change (decrease)(1)
      Release No change(1)
      (1) The value at the seat position attained when the battery is connected is considered to be 32768.

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals