LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Drive Positioner (Coupe)) >> DTC/Circuit Diagnosis >> Power Walk-In Switch >> Component Function Check
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FUNCTION
    1. Select "WALK-IN SW" in the "Data Monitor" mode using CONSULT.
    2. Check the power walk-in switch signal under the following condition.
      Test item Condition Status
      WALK-IN SW Power walk-in switch Pressed ON
      Released OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Refer to "DIAGNOSIS PROCEDURE ".